|
Model
No.
|
FIBER-OPTIC
PADDLEWHEEL FLOW SENSOR, 1/2" TO 4" PIPE
|
PRICE
|
|
FP9000
|
The FP9000 has been discontinued. Please see the FP2540 as a possible substitute or contact our Flow and Environmental department.
The
FP9000 lightspeed paddlewheel flow sensors are ideal
for applications in which the solutions have low viscosity
(are water-like) and low in suspended solids. A patented
fiber-optic sensing technique makes these sensors especially
well-suited for applications in hazardous environments,
where the paddlewheel electronics can be mounted in a non-hazardous
location and the near-infrared light signal can be sent
down the optic cable to the paddlewheel within the hazardous
location. This non-magnetic design tolerates some rust.
The P9000 series flow sensors must be used with the companion
installation fitting and interface Transmitter. |
|
FP9001
|
FIBER-OPTIC
PADDLEWHEEL FLOW SENSOR |
$225.00
|
|
INSTALLATION
FITTINGS - PVC Tee Schedule 80
|
|
FP9005
|
1/2"
pipe, flowrange (gpm) 1.0 to 20 |
$80.00
|
|
FP9007
|
3/4"
pipe, flowrange (gpm) 1.5 to 30 |
$90.00
|
|
FP9010
|
1"
pipe, flowrange (gpm) 2.7to 55 |
$90.00
|
|
FP9012
|
1
1/4" pipe, flowrange (gpm) 4.5 to 90 |
$100.00
|
|
FP9015
|
1
1/2" pipe, flowrange (gpm) 6.2 to 125 |
$100.00
|
| PVC
Saddle Schedule 80 |
|
FP9020
|
2"
pipe, flowrange (gpm) 10.5 to 20 |
$100.00
|
|
FP9025
|
2
1/2" pipe, flowrange (gpm) 15 to 300 |
$100.00
|
|
FP9030
|
3"
pipe, flowrange (gpm) 23 to 300 |
$120.00
|
|
FP9040
|
4"
pipe, flowrange (gpm) 39 to 800 |
$140.00
|
| INTERFACE
SIGNAL CONDITIONER "TRANSMITTER" |
|
FP9P-T
|
Fiber-optic
to TTL pulse interface, requires 24Vdc |
$155.00
|
|
FP9P-CL
|
Fiber-optic
to NPN open-collector, requires 24Vdc |
$195.00
|
| ACCESSORIES |
|
PSU-24B
|
115
Vac adapter, 24 Vdc output on screw terminals |
$40.00
|
|
TX4-100
|
4-wire
shielded cable, 100 ft. |
$28.50
|
